Vega's curved Frame design looks great from any angle.

Frame and Panels

The Vega frame has a curved profile 26mm in width and is manufactured from extruded and anodised aluminium 6063-T5. This ensures a life long sturdy frame to your door and will not be prone to damage or warping like some lower quality chipboard or MDF framed doors. They also have the advantage over wood in that they will not bow over time.

In Vega we offer a multitude of glass & wood effect panel finishes i.e. Walnut, Oak, White, Linen, Cashmere, Mid Walnut, Stone Grey (please see panel colours below)

*Please scroll to the bottom of this page to see door designs, product gallery, panel colours & product specifications (track sets etc)

Frame Colours - Steel - Aluminium

Silver (natural)              White                    
       

Frame Profile

*TRIPLE TRACK can be ADDED to this door range.

Bi-Fold & Pivot (Swing) Doors

*This range is also available as bi-fold & pivot (swing) doors (Please see the links to bi-fold & pivot doors)

Bi-fold - https://slidingrobes.com/category/made-to-measure-doors/bi-fold-doors
Pivot - https://slidingrobes.com/category/made-to-measure-doors/pivot-doors

Vega Curved MTM Doors - Technical Specifications

1. Bottom Roller for Aluminium System
Body made from high-impact structural plastic. The moving part is adjustable within the 0-15 mm range by means of an adjusting bolt and is provided with a spring anti-jump feature. The roller has a wheel of a high-strength plastic with an embedded sealed, lubricated steel ball bearing. The set comes with the adjusting bolt and washer. Resistance: up to 60 kg/2rollers, up to 50,000 open/close cycles.

2. Symmetrical Top Guide with Bearing for Alpha & Vega Curved
The guide is of durable steel construction. Two permanently riveted wheels of high-strength plastic and vibration damping rubber ensure extremely quiet operation.
Available in two versions:

3. Bottom Positioner. A component that holds in position alum-inium system doors up to 12 kg
A component that holds in position alum-inium system doors of 12 kg to 25 kg.
A component that holds in position alum-inium system doors of 25 kg to 50 kg.
(note: not included as standard but can be purchased)

4. Aluminium Double Bottom Track. Length: 5 m
Track made from aluminium alloy, anodized or finished in simulated wood paint.

6. Aluminium Double Top Track. Length: 5 m
Made from aluminium alloy, anodized or finished in simulated wood paint.

7 & 8. Vega Curved Aluminium Stile, 10 m Length: 5.5 m. A profile for 10 mm board, 8 or 6 mm glazing or 4 mm mirror panels. Made from aluminium alloy, anodized or finished in simulated wood paint. Profile length: 5000 mm.

9. Aluminium Single Bottom Track. Length: 5 m
A track made from anodized aluminium alloy. The width of the single track enables it to be easily connected with other tracks (butt joints), providing correct distances between door leaves.
(note: only supplied if a triple track is specified)

10. Aluminium Single Top Track. Length: 5 m
Aluminium Single Top Track. Length: 5 m. A track made from anodized aluminium alloy or finished in simulated wood film. The track features a “shadow line” which masks ceiling irregularities. Profile length: 5000 mm.
(note: only supplied if a triple track is specified)

11.Universal Soft Closure
It ensures that the door leaf closes softly to its end position. The soft closer features an air damper, which gu-arantees durability and performance stability throughout its useful life.
The design of the soft closer body allows it to be used as a left-hand or right-hand closer. The installation of the soft closer on the steel system-based door leaf is possible with the use of the steel system door closer accessories 099245. The soft closer is available in two versions:
099233 – soft closer for doors of up to 25kg in weight.
099234 – soft closer for doors of 25 to 50kg in weight. Application: S100, A100, A200.
Availability: continuous.
(note: not included as standard but can be purchased)

12. Fitting Soft Close
Please click on the link below.
https://slidingrobes.com/helpful-information/fitting-soft-close-budget-neptune-tess-minimal-and-venus