1 insert and fix the bottom pivot bracket with screws at a distance Y from the wall, of setting it inwards from the door face by x ( x 27mm and Y 39mm ) please see image below.
Advice: fixing the pivot socket, set screws at the centres of the oblong holes, which will enable you to adjust the postion in both directions.
SET THE DOOR IN PLACE
Rest the door on the bottom pivot socket, putting it upright, and turn the top pivot socket. Then unscrew the bottom pivot pin, so that the door rises and fits tightly against the top pivot socket. Use a level to plumb the door and reposition the top pivot socket if necessary.
Advice :Exercise special care when setting the door in place. This operation should be performed by two persons.
Door-to-floor clearance can be adjusted between 10mm and 20mm by screwing the pivot pins in or out.