Before fixing the top track, insert the top pivot socket, the roller and positioner into the track. Fix the top track with screws, offsetting its face by: X =9mm.
Advice: Avoid applying ecessive force when tightening screws to prevent track deformation. Use cheese – head scews for best result. The surface to which the track is fixed must not be curved.
INSTALL THE BOTTOM PIVOT SOCKET
Determine a plane running vertically along the centre of a top track (e.g using a plumb line). Position the bottom pivot socket at a distance of Y mm from the side of wall of the recess (the dimension allows for 5mm buffer strip thinkness)
Y = 39mm.
Advice: When fixing the hinge, set the screws at the centres of the oblong holes, which will enable you to adjust the position in both directions.
SET THE DOOR IN PLACE
Fold the door and set it in place so that the bottom pivot pin 15/3 sits in the socket 15/4. (See the assembly drawing below). Screw the top roller 15/5 bolt into the mounting block 15/6 using a 7mm open ended spanner. Using a 13mm open-ended spanner, unscrew the pivot pin of top pivot pin block 15/2 into the socket 15/1. Move the locating screw block 15/8 to the stile and fasten the block. Determine the final door height and set it symmetrically in the opening. Use a level to plumb the door, repositioning the top pivot socket if necessary. Fasten the top pivot socket 15/1 and all lock nuts.
Advice : Exercise special care when installing doors. This operation should be performed by two persons.
ADJUST THE DOOR
By turning the top and bottom pivot pins (right-left), adjust the door vertically so that it is 3mm away from the wall when closed (this space will be filled by dust – stop brush strip). Fasten the top and bottom pivot sockets to keep them in place. Close the door and adjust the top roller axle so that the door weight is distributed evenly between the hinge and the roller. By turning the pivot pins , door to floor clearance can be adjusted between 7 and 17mm.
FIX THE LOCATOR
Close the door when adjusted. Align the locator 15/9 with the locating screw. Mark the postion of the locator screw. Mark the position of the locator and open the door. Fix the locator to the floor with screws.
NOTE: The locator ensures stable position of the door when closed.
Images below
Request a free sample
Request a free brochure
COVID-19 UPDATE
In the light of the current situation regarding Covid-19, Sliding Robes Direct would like to reassure all
customers that
we are open for business as usual. We have plenty of capacity & the factory is operating as normal.
Our delivery company will ask if you are self isolating, if this is the case please let us know and we will
deliver to
door step or garage. All drivers are sanitising after each delivery.
In the interest of safety if you would
prefer not
to sign paperwork, instead we will take a photo of the items & use as proof of delivery.
Please everyone
take
care
during this very challenging time, we will only get through this if we work together.
If you have any queries please do not hesitate to contact us
or call us on 0333 210 6737.
UPTO 60% OFF SELECTED MADE TO MEASURE DOORS (including FREE TRACK
SETS
on
Standard & Made to Measure doors)
SOFT CLOSE available on Standard & Made to Measure doors
DELIVERY TIMES - 2-3 weeks on average EXPRESS DELIVERY – within 2
weeks
(Selected ranges)