Made To Measure Technical Specification

Made to measure wardrobes technical features

  • E Top Track for easy installation and adjustment
  • Maximum opening height of 2480mm, extendable to 2750mm (certain ranges)
  • Minimum recommended opening height of 900mm (certain ranges)
  • Maximum Opening width of 4880mm
  • Maximum door width of approx. 1220mm (certain ranges)
  • Minimum recommended door width of 400mm (certain ranges)
  • When installing, the Floor Track should be fitted back level with the back of the Top Track

Generally we will build your doors so that the overlap between front and rear doors is the same as the width of the door frame although this can be more depending (however if you require each door to be a specific width please send us an e-mail with this detail) We do this for aesthetic reasons only. You may notice that the door visualizer shows no overlap. This is just due to limitations in the software.

Made to measure wardrobes overlap and frame widths

  • BUDGET = 24mm Steel Frame
  • HERITAGE = 26mm Steel Frame
  • CLASSIC = 35mm Steel Frame
  • NEPTUNE = 34mm Steel Frame
  • SHAKER = 75mm Steel Frame
  • MIRAGE = 36mm Aluminium Frame
  • JUPITER ANGLED = 32mm Aluminium Frame
  • HERITAGE LOFT = 26mm Aluminium Frame
  • ALPHA = 32mm Aluminium Frame
  • REFLEX = 10mm Aluminium Frame
  • TESS MINIMAL = 9mm Aluminium Frame

Made to measure wardrobes running Gear Durability

All our made to measure wardrobes wheels and guides are cycle tested to 100,000 opening and closing actions in accordance with ANSI BHMA A156.14, This is an American National Standard, created in conjunction with Builders Hardware Manufacturers Association. The reason we test to this standard is because it’s the most rigorous sliding wardrobe door standard in the world, and enables our hardware to be sold to the contract market in the USA.

Made to measure wardrobes soft close durability

Our soft close system is tested to 40,000 open and closing actions in accordance with the German LGA Quality Directive, and RAL-GZ430 and DIN EN14749.
Minimum Door width for use with slow closure is 610mm.

Sliding Wardrobe Door Framing

All our made to measure wardrobes door frames are manufactured from either high grade roll formed steel, or extruded and anodised aluminium 6063-T5. This ensures a lifelong sturdy frame to your door, and will not be prone to damage or warping like some lower quality chipboard or MDF framed doors. They also have the advantage over wood in that they will not bow over time.

PLEASE NOTE-TRACK SETS HAVE TO BE CUT TO SIZE WITH A HACKSAW BY YOUR INSTALLER AT THE TIME OF INSTALLATION.

Sliding Wardrobe Door Mirror and Gloss Glass

High gloss glass panels are lacquered on the reverse face, to provide the highest quality gloss surface panels on the market. Mirror is high quality silver coated. All mirror and glass panels are safety laminated to pass BS6206, and Class 2B2 BSEN 12600. This ensures that you cannot fall through our glass or mirror panels, and if they were to break, then they crack in safe manner.

FSC Environmental Panels

All our panels are manufactured from FSC certified timber and particle board. FSC is the Forestry Stewardship Council certificate that guarantees our products come from environmentally managed sustainable forests.

Sliding Wardrobe Door Safety

As well as all our glass panels being safety laminated, our bottom wheels also come with an ‘anti jump’ device (shown in red in picture). This locks the wheel in the track to stop doors jumping clear of the track making our product the safest system on the market.

Dimensioned Cross Section

All dimensions in mm, and are nominal (i.e. subject to manufacturing tolerances). Soft close reduces available height adjustment by approximately 10mm. Aluminium and steel tracks are approximately the same dimensions.