Standard Doors Technical Information
Standard Door Technical Specifications
- Top Track with Fascia and Top Slide Guides
- No Soft Close
- If purchasing `Soft Close` Upgrade the opening height should be 2286mm
- Sized to suit an opening height of 2260mm
- Available door widths of 610mm (24inch), 762mm (30 inch) and 914mm (36inch)
- When installing, the Floor Track should be fitted back level with the back of the Top Track
- Door Frame widths and overlaps between front and rear doors:
Generally we recommend that the overlap between front and rear doors is the same as the width of the door frame. We do this for aesthetic reasons only, so the amount of overlap is really your choice. Choose more or less overlap to make standard doors fit smaller or larger openings. You may notice that the door visualizer shows no overlap. This is just due to limitations in the software.
Overlap and door frame widths:
= 27mm Steel Frame
= 35mm Steel Frame
= 58mm Aluminium Frame
= 5mm Aluminium Frame
= 75mm Steel Frame
= 36mm Steel Frame
= 24mm Aluminium Frame
= 27mm Steel Frame
Sliding Wardrobe Door Running Gear Durability
All our sliding wardrobe wheels and guides are cycle tested to 100,000 opening and closing actions in accordance with ANSI BHMA A156.14, This is an American National Standard, created in conjunction with Builders Hardware Manufacturers Association. The reason we test to this standard is because it’s the most rigorous standard in the world, and enables our hardware to be sold to the contract market in the USA, and enables us to confidently guarantee our running gear for 10 years of continuous use.
Sliding Wardrobe Door Framing
All our standard sized door frames are manufactured from high grade roll formed steel. This ensures a lifelong sturdy frame to your door, and will not be prone to damage or warping like some lower quality chipboard or MDF framed doors. They also have the advantage over wood in that they will not bow over time.
Sliding Robes Top and Bottom Tracks
Top and bottom tracks are also manufactured from high grade roll formed steel.
Sliding Robes Mirror and Gloss Glass
High gloss glass panels are lacquered on the reverse face, to provide the highest quality gloss surface panels on the market. Mirror is high quality silver coated. All mirror and glass panels are safety laminated to pass BS6206, and Class 2B2 BSEN 12600. This ensures that you cannot fall through our glass or mirror panels, and if they were to break, then they crack in safe manner.
FSC Environmental Panels
All our panels are manufactured from FSC certified timber and particle board. FSC is the Forestry Stewardship Council certificate that guarantees our products come from environmentally managed sustainable forests.
As well as all our glass panels being safety laminated, our bottom wheels also come with an ‘anti jump’ device (shown in red in picture). This locks the wheel in the track to stop doors jumping clear of the track making our product the safest system on the market.
Dimensioned Cross Sectional Drawing
All dimension in mm. Dimensions are nominal (i.e. subject to manufacturing tolerances).
How to install Standard Size Doors
How to measure Standard Doors
Kids Doors & Accessories
Standard Doors Brochure